On Thursday, January 16, 2014 12:10:35 PM UTC-5, [email protected] wrote: > > > Fantastic, thanks for this, I'm in the process of running my first build. > > Success! ... I think. Don't seem to have working ethernet, here's the console output:
[ 0.361322] omap2_mbox_probe: platform not supported [ 0.528826] tps65217-bl tps65217-bl: no platform data provided [ 0.593518] bone-capemgr bone_capemgr.9: slot #0: No cape found [ 0.630626] bone-capemgr bone_capemgr.9: slot #1: No cape found [ 0.667733] bone-capemgr bone_capemgr.9: slot #2: No cape found [ 0.704842] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 0.720846] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI) [ 0.730428] bone-capemgr bone_capemgr.9: slot #6: Failed verification [ 0.737160] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.753514] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed [ 0.816446] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 0.828157] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 0.835441] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single Loading, please wait... Scanning for Btrfs filesystems systemd-fsck[201]: rootfs: clean, 32162/111104 files, 140904/444160 blocks [ 6.087883] libphy: PHY 4a101000.mdio:01 not found [ 6.092953] net eth0: phy 4a101000.mdio:01 not found on slave 1 Any thoughts? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
