Robert, I tried this new build on a BBB with good success. I used the setup_sdcard.sh approach on an 8GB SD card. WiFi works with a cheapo Rosewill USB dongle:
[ 15.015308] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin [ 15.015468] usbcore: registered new interface driver rtl8192cu I am using the 3.13 kernel: Linux markbbb 3.13.0-rc8-bone4 #1 SMP Tue Jan 14 16:22:05 UTC 2014 armv7l GNU/Linux I have an I2C 8x8 LED matrix scrolling continuously, so i2c is good. Running headless so no report on HDMI. A couple small requests/suggestions: * Add /sbin and /usr/sbin to the default PATH * Enable the EXTRA_GROUPS options in /etc/adduser.conf and add i2c to the EXTRA_GROUPS * Add a way to identify the build version (or tell me how). I see /etc/os-release but it does not have a RCN build identifier in it Thanks much for your work on this. Mark On Thu, Jan 16, 2014 at 1:43 PM, Robert Nelson <[email protected]>wrote: > On Thu, Jan 16, 2014 at 3:42 PM, Robert Nelson <[email protected]> > wrote: > > Thanks for everyone who tested 2014-01-10... So here we go, round two... > > > > First, for tracking please report all bugs to: > > http://bugs.elinux.org/projects/debian-image-releases > > > > Fixes: > > 3.8.13-bone35 -> 3.8.13-bone36 > > * uvc camera backport > > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8ca5d2d8e58df7235b77ed435e63c484e123fede > > * config sync with last Angstrom, missing a few modules, thumb2 enabled.. > > > > lxde: autostart of screensaver disabled (pegged cpu to 100%) > > /opt/scripts/ now a git repo, easier to pull in board tweaks for > > bootup scripts.. > > * including a kernel update script under > /opt/scripts/tools/update_kernel.sh > > Chromium updated to 32.0.1700.76 with webrtc enabled. > > 4gb image, dropped from 3750Mb to 3700Mb, should work with more 4GB > cards. > > /var/lib/cloud9/node_modules/bonescript/ nodejs dependicy now installed > > > > Know Issues: > > wicd: can only handle eth0 or wlan0, not both at the same time.. > > > > Questions? Should we switch to connman? > > > > To test: > > apt-get remove wicd-* --purge > > apt-get install connman > > (no good gui with connman) > > > > Does your "cape" work? > > > > Does your wifi adapter work? Are we missing it's firmware? > > > > So go forward and test the first "beta" release. There are 3 files on > > the web server, depending on what you want to do. Using the same > > standard procedure found here: > > http://elinux.org/Beagleboard:Updating_The_Software > > > > http://rcn-ee.net/deb/testing/2014-01-16/ > > > > 7cda65ef9971d8d770a84c00b8863c1e > > BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz > > c84011db191151986d14fe73e43f5f4d bone-debian-7.3-2014-01-16-4gb.img.xz > > 05ed49c8fe4555081f83f5be61b2b75b debian-7.3-lxde-armhf-2014-01-16.tar.xz > > > > An eMMC "flasher" which can be installed to any 2GB or greater microSD > > card. [BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz] > > > > > http://rcn-ee.net/deb/testing/2014-01-16/BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz > > > > It takes about 10-15 Minutes to dd microSD (2GB), 15 minutes to flash > > eMMC (look for full 4 LED's) > > > > 4GB standalone image that can be flashed to any 4GB or greater. > > [bone-debian-7.3-2014-01-16-4gb.img.xz] > > > > > http://rcn-ee.net/deb/testing/2014-01-16/bone-debian-7.3-2014-01-16-4gb.img.xz > > > > It takes about 20-30 Minutes to dd microSD (4GB) > > > > Finally one of my classic "setup_sdcard.sh". > > [debian-7.3-console-armhf-2014-01-16.tar.xz] > > > > > http://rcn-ee.net/deb/testing/2014-01-16/debian-7.3-console-armhf-2014-01-16.tar.xz > > Doh! <cough> > > > http://rcn-ee.net/deb/testing/2014-01-16/debian-7.3-lxde-armhf-2014-01-16.tar.xz > > I'll get this form letter correct one of these weeks... > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
