On Mon, Jan 20, 2014 at 3:08 PM, Michael <[email protected]> wrote: > Hi Robert, > > many thanks for your work! > > I used the "setup_sdcard.sh" with > "/rootfs/wheezy/debian-7.3-console-armhf-2014-01-17.tar.xz" and the boot > time is reduced very much compared to the 2014-01-10 package (now only about > 10 seconds including Ethernet with systemd).
Isn't systemd awesome for that! ;) > > One thing: The "gadget"-drivers are not automatically loaded. I only can > bring up everything with executing > "/boot/uboot/tools/scripts/beaglebone-black-g-ether-load.sh" but I have to > do this after every start up. > How can I enable this by default? Sorry the "2014-01-17" release is broken, so it became an un-release, i'm waiting for my v3.13.0 release for the beagle/beagle-xm to finish before i push out a good "2014-01-20/21".. It's easy to fix via, just sudo mkdir -p /opt/scripts/ sudo chown -R debian:debian /opt/scripts/ git clone git://github.com/RobertCNelson/boot-scripts /opt/scripts/ I made the mistake of using "https://"; in the git clone, this broke both wheezy/jessie due to a missing ca certificate.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
