Thanks Robert, I just booted it for the first time and so far so good. I see that there's still no ioctl for RS485 mode on the UARTs though. Is there a reason RS485 support isn't enabled on the BB kernel builds?
-Alex On Thursday, January 16, 2014 4:42:34 PM UTC-5, RobertCNelson wrote: > > Thanks for everyone who tested 2014-01-10... So here we go, round two... > > First, for tracking please report all bugs to: > http://bugs.elinux.org/projects/debian-image-releases > > Fixes: > 3.8.13-bone35 -> 3.8.13-bone36 > * uvc camera backport > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8ca5d2d8e58df7235b77ed435e63c484e123fede > > * config sync with last Angstrom, missing a few modules, thumb2 enabled.. > > lxde: autostart of screensaver disabled (pegged cpu to 100%) > /opt/scripts/ now a git repo, easier to pull in board tweaks for > bootup scripts.. > * including a kernel update script under > /opt/scripts/tools/update_kernel.sh > Chromium updated to 32.0.1700.76 with webrtc enabled. > 4gb image, dropped from 3750Mb to 3700Mb, should work with more 4GB cards. > /var/lib/cloud9/node_modules/bonescript/ nodejs dependicy now installed > > Know Issues: > wicd: can only handle eth0 or wlan0, not both at the same time.. > > Questions? Should we switch to connman? > > To test: > apt-get remove wicd-* --purge > apt-get install connman > (no good gui with connman) > > Does your "cape" work? > > Does your wifi adapter work? Are we missing it's firmware? > > So go forward and test the first "beta" release. There are 3 files on > the web server, depending on what you want to do. Using the same > standard procedure found here: > http://elinux.org/Beagleboard:Updating_The_Software > > http://rcn-ee.net/deb/testing/2014-01-16/ > > 7cda65ef9971d8d770a84c00b8863c1e > BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz > c84011db191151986d14fe73e43f5f4d bone-debian-7.3-2014-01-16-4gb.img.xz > 05ed49c8fe4555081f83f5be61b2b75b debian-7.3-lxde-armhf-2014-01-16.tar.xz > > An eMMC "flasher" which can be installed to any 2GB or greater microSD > card. [BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz] > > > http://rcn-ee.net/deb/testing/2014-01-16/BBB-eMMC-flasher-debian-7.3-2014-01-16-2gb.img.xz > > > It takes about 10-15 Minutes to dd microSD (2GB), 15 minutes to flash > eMMC (look for full 4 LED's) > > 4GB standalone image that can be flashed to any 4GB or greater. > [bone-debian-7.3-2014-01-16-4gb.img.xz] > > > http://rcn-ee.net/deb/testing/2014-01-16/bone-debian-7.3-2014-01-16-4gb.img.xz > > > It takes about 20-30 Minutes to dd microSD (4GB) > > Finally one of my classic "setup_sdcard.sh". > [debian-7.3-console-armhf-2014-01-16.tar.xz] > > > http://rcn-ee.net/deb/testing/2014-01-16/debian-7.3-console-armhf-2014-01-16.tar.xz > > > Note for users who use my classic "setup_sdcard.sh" script, here is > the magic options to get the beaglebone project files + systemd. > > sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone > --beagleboard.org-production --enable-systemd > > To "rebuild" > git clone git://github.com/beagleboard/image-builder.git > cd image-builder > git checkout bb.org-v2014.01.16 -b tmp > ./beagleboard.org_image.sh > > Go Test! > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
