All the SW uses is the name of the board and maybe the revision. None of the other stuff ever got implemented.
Gerald On Mon, Jan 27, 2014 at 7:57 AM, Dennis McLeod <[email protected]> wrote: > Bits 15, and 6:0 are used by SW though, correct? It's just bits 14:13 > you're saying aren't used by SW? > > On a related note, and forgive me if it's a silly question.. but does > having the eeprom programmed with this table mean that it's not necessary > to create a *.dtbo file? > > > Thanks Gerald, > > Dennis > > > > On Monday, January 27, 2014 8:50:49 AM UTC-5, Gerald wrote: > >> Well, considering none of this is being used by the SW, take your pick >> and I will change it to whatever you like. >> >> Gerald >> >> >> >> On Fri, Jan 24, 2014 at 5:25 PM, Dennis McLeod <[email protected]> wrote: >> >>> In the SRM in table 14, it says under "Pin Usage" that: >>> >>> Bit 15..............Pin is used or not..............0=Unused by cape >>> 1=Used by cape >>> Bit 14-13.........Pin Direction...................1 0=Output 01=Input >>> 11=BDIR >>> Bits 12-7.........Reserved........................should be all zeros >>> >>> but in the next section, 8.2.5, it says bits 14-7 are reserved. >>> >>> Which is correct? >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
