Perhaps a silly question but you are holding down the boot button to force it to boot to the SD card?
On Wednesday, February 12, 2014 2:04:37 AM UTC-8, Kees k wrote: > > I cannot reflash the eMMc. This particular BBBB (BBB brick) does not even > boot from a SD card, although another BBB boots perfectly from the same SD > card. > > On Thursday, February 6, 2014 4:36:36 PM UTC+1, Gerald wrote: >> >> Signals look fine. Memory cannot be bricked if you follow the >> instructions for reflashing the eMMC.. >> >> http://www.elinux.org/Beagleboard:Updating_The_Software >> >> >> Gerald >> >> >> On Thu, Feb 6, 2014 at 8:36 AM, Kees k <[email protected]> wrote: >> >>> Hello all, >>> >>> Right now I have a beaglebone black (A6), which has been used for 1-2 >>> weeks. Unfortunately, it stopped booting this week. Some days ago it did >>> not boot, but after resupplying power it it did. Now the BBB does not boot >>> at all. >>> -USR0-USR3 never lit >>> -PWR LED lits >>> -LDO pin 3 (out) = 3.3V >>> -PMIC_PWR_EN = 1.8V >>> -PGOOD = 1.8V >>> -Serial debug port shows nothing >>> >>> Does anyone have hints on which signals to measure? Or is the processor >>> / memory bricked? >>> >>> Best, >>> >>> Kees >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
