@gerald. Does the debug port show really nothing then? I mean: I already do not expect the eMMC to be bricked after only 2 weeks of usage with a read-only boot partition and rootfs. I use other BBBs with the same SW already since oktober 2013.
@Rusty: Yes i did On Thursday, February 6, 2014 3:36:29 PM UTC+1, Kees k wrote: > > Hello all, > > Right now I have a beaglebone black (A6), which has been used for 1-2 > weeks. Unfortunately, it stopped booting this week. Some days ago it did > not boot, but after resupplying power it it did. Now the BBB does not boot > at all. > -USR0-USR3 never lit > -PWR LED lits > -LDO pin 3 (out) = 3.3V > -PMIC_PWR_EN = 1.8V > -PGOOD = 1.8V > -Serial debug port shows nothing > > Does anyone have hints on which signals to measure? Or is the processor / > memory bricked? > > Best, > > Kees > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
