Thank you Gerald. I will confirm if that is the case when I see the sample.
On Tuesday, 18 February 2014 16:06:10 UTC, Gerald wrote: > > We did tighten them up along time ago, so that is most likely the issue > they think they have. > > Gerald > > > > On Tue, Feb 18, 2014 at 9:45 AM, <[email protected]<javascript:> > > wrote: > >> Thank you for the speedy response Gerald. >> >> The PCB files used were those contained in Beaglebone_blackrevB4_MFG.zip >> >> Is it likely the holes were deliberately under-sized to the datasheet to >> give the tight fit you mention. >> >> I am yet to see the problem physically for myself. The PCB supplier is >> sending the board to me so I can assess. >> >> On Tuesday, 18 February 2014 13:43:18 UTC, Gerald wrote: >> >>> We don't have any issues. We do look for a tight fit to prevent moving >>> during the soldering process. We have used these same connectors for a very >>> long time now without issue. >>> >>> Which PCB files did you use? >>> >>> Gerald >>> >>> >>> >>> On Tue, Feb 18, 2014 at 6:41 AM, <[email protected]> wrote: >>> >>>> >>>> I hope someone can help with this. >>>> >>>> I am currently getting some BBB PCBs manufactured. I have used the >>>> gerber data and BoM supplied but the PCB manufacturer is reporting an >>>> issue >>>> with the specified connectors not fitting because the PCB hole size is too >>>> small to take the pins. >>>> >>>> The connector specified is: SSHS-123-D-02-GT-LF which has recommended >>>> hole size of 0.040 (1.2mm) >>>> >>>> The PCB manufacturer is telling that the hole size in the drill file >>>> is: T04 Holesize 4. = 30.000000 Tolerance = +3.000000/-3.000000 PLATED >>>> MILS >>>> Quantity = 96 >>>> >>>> The data I have sent to them is from the file: >>>> Beaglebone_blackrevB4_MFG.zip >>>> >>>> I am unsure what has happened here. Obviously these boards can be >>>> manufactured with the data. >>>> >>>> I'd be grateful of any input and also if anyone can specify a connector >>>> that will fit holes of that size? >>>> >>>> Many Thanks. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
