The BBB is not going to be redesigned. But, you may find someone to do a custom board or you.
1) 24V power source, just convert it to 5V. 2) That can be done, but it will be very expensive. 3) It is already 512MB, not sure why you want to do down 2gb, If I assume that you mean 2GB, it can't be done. Max memory on the processor is 1GB. Oh, and the board will not cost $45. It will be a lot more. Gerald On Thu, Feb 20, 2014 at 2:28 PM, Mark Zeilenga <[email protected]> wrote: > I have a potential application for a device like the BBB but it needs a > few changes. I'm a software guy so I don't know if they are minor design > changes or major. I work as an OEM in the manufacturing world. Most > devices I deal with are 24v. So how difficult would it be do redesign the > BBB to have the following: > > 1. 24v power source > 2. 24v I/O > 3. 1 to 2gb RAM > > I assume a nice cape could also be designed to bring the I/O into nice > screw terminals too. > > I understand the BBB was not intended for this but it seems a pretty good > starting point and I just wanted to know the feasability and potential cost > of doing something like this. > > Mark > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
