Guy, That's some very useful information. If I made a cape I would make it large enough to hold the extra circuitry. It doesn't have to be the footprint of the BBB. This definitely warrants more investigation. Mark
On Thursday, February 20, 2014 3:28:26 PM UTC-5, Mark Zeilenga wrote: > I have a potential application for a device like the BBB but it needs a > few changes. I'm a software guy so I don't know if they are minor design > changes or major. I work as an OEM in the manufacturing world. Most > devices I deal with are 24v. So how difficult would it be do redesign the > BBB to have the following: > > 1. 24v power source > 2. 24v I/O > 3. 1 to 2gb RAM > > I assume a nice cape could also be designed to bring the I/O into nice > screw terminals too. > > I understand the BBB was not intended for this but it seems a pretty good > starting point and I just wanted to know the feasability and potential cost > of doing something like this. > > Mark > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
