So here's a special gift from Jason, Cloud9 on node 0.10.x So, can we call it an RC? ;)
First, for tracking please report all bugs to: http://bugs.elinux.org/projects/debian-image-releases Kernel: 3.8.13-bone40 Changes: npm/nodejs/libsoc all from: beagle.s3.amazonaws.com/debian now. Cloud9: http://beaglebone.local:3000/ Note, there's a last minute glaring Cloud9/Debugging bug, any demo once ran, just stops in the debugger http://elinux.org/Beagleboard:Updating_The_Software http://rcn-ee.net/deb/testing/2014-02-24/ 8f8955574329c6b17b7c515cac9798f3 ./BBB-blank-eMMC-flasher-debian-7.4-2014-02-24-2gb.img.xz 98bef60e1494fa5dca4bb65b76365fda ./BBB-eMMC-flasher-debian-7.4-2014-02-24-2gb.img.xz 95ec80f131f5e8f1ca4833d5c6acb8fe ./bone-debian-7.4-2014-02-24-2gb.img.xz c08a919876d02d71fcfebd01c502a9d5 ./debian-7.4-lxde-armhf-2014-02-24.tar.xz The "blank flasher" this is for eeprom less beaglebone blacks, do NOT run on a classic beaglebone white. (this is designed to flash factory blank boards) An eMMC "flasher" which can be installed to any 2GB or greater microSD card. [BBB-eMMC-flasher-debian-7.4-2014-02-24-2gb.img.xz] http://rcn-ee.net/deb/testing/2014-02-24/BBB-eMMC-flasher-debian-7.4-2014-02-24-2gb.img.xz It takes about 10-15 Minutes to dd microSD (2GB), 15 minutes to flash eMMC (look for full 4 LED's) 2GB standalone image that can be flashed to any 2GB or greater. [bone-debian-7.4-2014-02-24-2gb.img.xz] http://rcn-ee.net/deb/testing/2014-02-24/bone-debian-7.4-2014-02-24-2gb.img.xz It takes about 10-15 Minutes to dd microSD (2GB) To resize once booted: * cd /opt/scripts/ * ./tools/grow_partition.sh * sudo reboot Finally one of my classic "setup_sdcard.sh". [debian-7.4-lxde-armhf-2014-02-24.tar.xz] http://rcn-ee.net/deb/testing/2014-02-24/debian-7.4-lxde-armhf-2014-02-24.tar.xz Note for users who use my classic "setup_sdcard.sh" script, here is the magic options to get the beaglebone project files + systemd. sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone --beagleboard.org-production --enable-systemd To "rebuild" git clone git://github.com/beagleboard/image-builder.git cd image-builder git checkout bb.org-v2014-02-24 -b tmp touch release ./beagleboard.org_image.sh -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
