You can contact me. There is also the source code for the driver that we have been using in our Linux images.
Gerald On Wed, Mar 19, 2014 at 5:49 PM, Travis Estep <[email protected]> wrote: > I made a post about this exact thing here a couple of months back, and > received little help. One user was kind enough to get me started with some > code that he had written for a Minix driver for that chip, but it only had > the EDID driver code. So, I went on a manhunt to find anything I could. I > knew that all of the information I was looking for had to be in a Linux > kernel somewhere, so I started there. Here is the best code I have found to > date: > > > https://github.com/rabeeh/linux-2.6.32.9/tree/c04795236fe2cb5024b0e6f278ec59346afd43b3/drivers/video/display/nxp > > This is the code for a full driver for the TDA19988 chip. Be warned, this > chip is pretty complex compared to other components I have interfaced with. > I have made some really good progress on my bare metal implementation and > hope to have some code posted in a couple of weeks that anyone can start > using. But again, this is a bare metal driver, not a Linux driver. > > Gerald, > > Would it be OK if I contacted you for the information you have? Maybe what > you have will help me complete my driver a little faster so that I can > share it with the community. There's obviously some interest in this. I > would venture to say that if some easy-to-use code existed, the interest > would be much higher :) > > On Wednesday, March 19, 2014 4:49:59 PM UTC-4, Gerald wrote: > >> I have more. >> >> Gerald >> >> >> >> On Wed, Mar 19, 2014 at 3:49 PM, Robert Nelson <[email protected]>wrote: >> >>> On Wed, Mar 19, 2014 at 3:39 PM, <[email protected]> wrote: >>> > Looking for the data sheet for the NXP TDA19988. It's not on any >>> > distributor web site or the NXP web site. There are very few units in >>> the >>> > channel. Is this still the HDMI interface device of choice for BBB? >>> > Doesn't anyone know the status or availability of tech documents for >>> this >>> > device? >>> >>> On the GSOC mailing list, one user got this out of NXP.. >>> >>> https://github.com/ZubairLK/tda19988 >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
