From: <gkil...@gmail.com> Reply-To: <beagleboard@googlegroups.com> Date: Thursday, March 20, 2014 at 7:31 PM To: <beagleboard@googlegroups.com> Subject: [beagleboard] BBB JTAG for iJet (IAR/Segger)
> Does anyone know of a JTAG adapter for the BBB that will connect to the > IAR/Segger iJet? > > The Samtec FTR-110-03-G-D-06 does not have the correct spacing or pin-out. > The two rows have the correct pin-to-pin spacing but the two rows are too far > apart (.05inX.05in pitch) > The IAR interface has the following pinout: > 1 VTref 2 SWDIO/TMS > 3 GND 4 SWCLK/TCK > 5 GND 6 SWO/TDO > 7 N/C 8 TDI > 9 GNC 10 nRESET > 11 TgtPwr 12 N/C > 13 TgtPwr 14 N/C > 15 GND 16 N/C > 17 GND 18 N/C > 19 GND 20 N/C > > Thanks in advance for any help!!! You need an ARM 20Pin JTAG to Compact TI 20Pin JTAG (cTI). Look at TinCanTools -ARM20cTI20 - cTI 20-pin JTAG Adapter Board. Regards, John > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.