From: <gkil...@gmail.com> Reply-To: <beagleboard@googlegroups.com> Date: Friday, March 21, 2014 at 5:51 PM To: <beagleboard@googlegroups.com> Subject: [beagleboard] Re: BBB JTAG for iJet (IAR/Segger)
> John, > If everyone used the same JTAG it would make things too easy!!! > > I'm using IAR EWARM. So no Linux? > > Making an adapter board isn't hard so I guess that's what I'll do. I'll just > grad a small pad-per-hole proto board and hotwire it together. > > Thanks again for the help! > Grant > > > On Thursday, March 20, 2014 8:31:26 PM UTC-6, gki...@gmail.com wrote: >> Does anyone know of a JTAG adapter for the BBB that will connect to the >> IAR/Segger iJet? >> >> The Samtec FTR-110-03-G-D-06 does not have the correct spacing or pin-out. >> The two rows have the correct pin-to-pin spacing but the two rows are too far >> apart (.05inX.05in pitch) >> The IAR interface has the following pinout: >> 1 VTref 2 SWDIO/TMS >> 3 GND 4 SWCLK/TCK >> 5 GND 6 SWO/TDO >> 7 N/C 8 TDI >> 9 GNC 10 nRESET >> 11 TgtPwr 12 N/C >> 13 TgtPwr 14 N/C >> 15 GND 16 N/C >> 17 GND 18 N/C >> 19 GND 20 N/C >> >> Thanks in advance for any help!!! > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.