I got a Beaglebone Black from Adafruit last Friday, have it for a couple days, but I think it's dead now. On arrival, the ssh and everything work fine, however, the hdmi port does not work. I verified this later with another Beaglebone Black that arrived which work on the same equipment.
Just today, I was doing some prototyping work, remove the BBB usb from computer while leaving it run on DC power. After a couple minutes, I found that the all LED on the board is off. I tried rebooting, nothing happen. The power LED only give me 1 blink when I press the power button / plug in power, then nothing. Maybe I corrupted the memory? So I try to flash a new OS with a microSD card, plug in power while holding the boot button. No luck with that either. It wouldn't even start the flashing process. It just give me one blink in the power LED and that's it. So is my Beaglebone officially dead? =( Kinda a bad first experience with the product... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
