http://www.elinux.org/Beagleboard:BeagleBoneBlack#Expansion_Header_Usage
Gerald On Tue, Mar 25, 2014 at 3:21 PM, Billy Hau <[email protected]> wrote: > Ok Thanks, I will request a RMA. How do I prevent that from happening > again? > > > On Tuesday, March 25, 2014 4:15:12 PM UTC-4, Gerald wrote: > >> Request an RMA and get it replaced. http://www.elinux.org/ >> Beagleboard:BeagleBoneBlack#RMA_Support >> >> Most likely during your prototype work you popped a processor pin. The >> processor is consuming too much current an the PMIC is shutting down. >> >> Gerald >> >> >> On Tue, Mar 25, 2014 at 3:11 PM, <[email protected]> wrote: >> >>> I got a Beaglebone Black from Adafruit last Friday, have it for a couple >>> days, but I think it's dead now. >>> On arrival, the ssh and everything work fine, however, the hdmi port >>> does not work. >>> I verified this later with another Beaglebone Black that arrived which >>> work on the same equipment. >>> >>> Just today, I was doing some prototyping work, remove the BBB usb from >>> computer while leaving it run on DC power. >>> After a couple minutes, I found that the all LED on the board is off. I >>> tried rebooting, nothing happen. >>> The power LED only give me 1 blink when I press the power button / plug >>> in power, then nothing. >>> >>> Maybe I corrupted the memory? >>> So I try to flash a new OS with a microSD card, plug in power while >>> holding the boot button. >>> No luck with that either. It wouldn't even start the flashing process. >>> It just give me one blink in the power LED and that's it. >>> >>> So is my Beaglebone officially dead? =( >>> Kinda a bad first experience with the product... >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
