If all you need is access to the Linux filesystem on the BBB, then Samba is the best way to go. Any working howto for Debian wheezy found on the web should work.
Then, on Windows . . . 1) Right click computer 2) Select map network drive. 3) add \\BBB_ip_address\sharename 4) select connect using different credentials checkbox 5) click finish 6) enter username / passwd for Linux smbuser On Fri, Apr 11, 2014 at 8:13 AM, Cody Lacey <[email protected]> wrote: > Samba works too. > > > On Fri, Apr 11, 2014 at 10:10 AM, William Hermans <[email protected]>wrote: > >> Samba ? >> >> >> On Fri, Apr 11, 2014 at 8:08 AM, Cody Lacey <[email protected]> wrote: >> >>> You ran the 64bit driver install -> connected to the BBB using USB -> >>> Mass Storage Device did not mount? >>> Did windows display anything? "Installing drivers"? >>> >>> If not, does anything show up in device manager under Portable Devices? >>> Or is there anything with a small triangle exclamation mark. >>> >>> Start->run->"mmc devmgmt.msc" >>> >>> >>> >>> On Thu, Apr 10, 2014 at 5:23 PM, <[email protected]> wrote: >>> >>>> >>>> So, my BBB is running perfectly with Robert's latest Debian release. I >>>> can mount it as a drive on my desktop just fine. But now I need (through >>>> circumstances beyond my control) to mount it as a drive on Windows. I'm >>>> pretty clueless about Windows. I have a laptop with Windows 7-64, I >>>> downloaded the drivers as recommended on the BB site, but it still won't >>>> mount. I've also seen the INF file in the kernel source, but I have no idea >>>> how I might need or use that. Any Windows-competent folk out there who >>>> might know how to get this working? BTW, I don't really care about the >>>> RNDIS or UART stuff, but if I have to have them to get the storage part >>>> working, that's fine. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
