You need to install the driver while the device is plugged in . . . Anyhow, I have not installed this driver since the BBB first came out, but it worked fine straight away for me on Angstrom, and then following RCN's instructions of cross compiling kernel / setting up a rootfs, it worked fine with this driver as well. I use the same or similar version of Windows. Windows 7 X64 Enterprise.
A couple things to think about. 1) With the stock Debian it may be possible that the BBB will take up to around a minute to fully boot up. So the USBNet drivers wont be up until this happens. 2) When deleting the drivers from the system in preparation of reinstallation, you should enter into safe mode ( F8 boot option ) 3) When installing the drivers make sure you have elevated permissions. Some people disable UAC, which may / may not cause issues. Others yet may try to install drivers as a regular user not realizing that installing drivers requires admin privs. With UAC disabled this could be a problem. Right clicking the the executable and selecting Run as . . . -> Admin should do the trick. Sorry if this seems obvious . .. kind of hard to troubleshoot a PC over the internet when you have no idea what all is going on at the given system. On Fri, Apr 11, 2014 at 9:16 AM, <[email protected]> wrote: > Yes, I downloaded and ran the 64-bit driver installer. When I plug in the > BBB, I get the little "clunk" noise, and a window saying "Device driver was > not successfully installed". The popup window shows the name > "BeagleBoneBlack", and "No driver found" with a red X. > > Device manager lists "Other Devices", and under that, "BeagleBoneBlack" > with a yellow bang icon. Popup says "The drivers for this device are not > installed.(Code 28). Google is not helpful. > > For the rest of you, thanks for the Samba suggestion; yes, I'm sure that > would work if I just wanted to get files off the BBB, but the client wants > this particular function. It used to work with Angstrom, so I'm sure it's > just a minor issue of changing a name or number somewhere. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
