Hi There -
I'm trying to figure out how to change the eth0 port on a Beaglebone Black
to a specific port speed like 10Mbps. It appears now (see below) that it
is set to auto. Any assistance would be much appreciated.
Tim
root@beaglebone:/usr/lib/connman/test# ./get-services
[ /net/connman/service/ethernet_1cba8ca2bf39_cable ]
IPv6.Configuration = { Method=auto Privacy=disabled }
AutoConnect = true
Name = Wired
Nameservers = [ 8.8.8.8 8.8.4.4 ]
Provider = { }
Favorite = true
Domains.Configuration = [ ]
Timeservers.Configuration = dbus.Array([],
signature=dbus.Signature('s'), variant_level=1)
State = online
Proxy = { Method=direct }
Nameservers.Configuration = [ 8.8.8.8 8.8.4.4 ]
IPv4 = { Netmask=255.255.255.0 Gateway=192.168.1.1 Method=manual
Address=192.168.1.10 }
Timeservers = dbus.Array([dbus.String(u'192.168.1.1')],
signature=dbus.Signature('s'), variant_level=1)
IPv6 = { }
Domains = [ ]
Ethernet = { Interface=eth0 MTU=1500 Method=auto
Address=1C:BA:8C:A2:BF:39 }
Security = [ ]
Proxy.Configuration = { }
Type = ethernet
Immutable = false
IPv4.Configuration = { Netmask=255.255.255.0 Gateway=192.168.1.1
Method=manual Address=192.168.1.10 }
root@beaglebone:/usr/lib/connman/test#
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
