Try checking out the CRAMPS board. That might fit part of what you want On Apr 23, 2014 11:50 AM, "Markus Osmers" <[email protected]> wrote:
> Hey folks, > I'm just new into Beagle Bone Black and looking forward to build a CNC-Box > from scratch. > > I also want to use this Controller for 3D printing so it will actually > need 3x axis support plus even one or more extruder stepper-motor outputs > an also a few PWM Outputs for fan an for sure some temperature sensor I/Os > as for the extruder an a heating bed. > It also should come with a high power support for min. one heatbed like > the MK2 better i would be able to use two, and it needs high voltage output > for min. two hot-ends. > > I found a few Creations for the Beagle Bone Black but actually there is > nothing to buy and every seen solution just not fit my needs. > > So i actually come to this one: > http://igg.me/at/t-bone/x/7041114 > > Which will have most of the wanted features and while they make it > stackable I would be able to add as many Extruders and Outputs I like. > > But even with this solution, if it get's founded, I would like to have > just some more high power switching. > > Is their any soluition you would recommend to buy for building my CNC-Box > with a Beagle Bone Black. > > OR does anyone has a starting point for building my own Solution step by > step. > I looked at the chips they use, they are from trinamic motion control and > able to get from retailer, so may i could build my own test controller with > those chips. I would just need the 3 CNC Axis System for now. > And I also ordered the t-bone board which will become open Hardware but > need something for now or for an alternative when it didn't get > successfully founded. > > So is anybody interested in building up a breadbord version for 3 axis > controll with beagle bone black, based on the trinamic chips: - TMC2660-PA > and TMC429-LI ?? > > May there are some geniuses which could help build it, just cause they can > an I don't ;-) > > Any suggestion would be appreciated > > Thx > > Markus > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
