Hey Bas, thanks for your info, but where to buy and what will be the price?
On Wed, Apr 23, 2014 at 6:24 PM, Bas Laarhoven <[email protected]> wrote: > > Or if you want a ready to run board, available from stock, make sure to > check my BeBoPr++ ! The manual is available online. > (https://github.com/modmaker/BeBoPr-plus-plus) > > -- Bas > > > > On 23-4-2014 18:17, Lord Drachenblut wrote: > > Try checking out the CRAMPS board. That might fit part of what you want > On Apr 23, 2014 11:50 AM, "Markus Osmers" <[email protected]> wrote: > >> Hey folks, >> I'm just new into Beagle Bone Black and looking forward to build a >> CNC-Box from scratch. >> >> I also want to use this Controller for 3D printing so it will actually >> need 3x axis support plus even one or more extruder stepper-motor outputs >> an also a few PWM Outputs for fan an for sure some temperature sensor I/Os >> as for the extruder an a heating bed. >> It also should come with a high power support for min. one heatbed like >> the MK2 better i would be able to use two, and it needs high voltage output >> for min. two hot-ends. >> >> I found a few Creations for the Beagle Bone Black but actually there is >> nothing to buy and every seen solution just not fit my needs. >> >> So i actually come to this one: >> http://igg.me/at/t-bone/x/7041114 >> >> Which will have most of the wanted features and while they make it >> stackable I would be able to add as many Extruders and Outputs I like. >> >> But even with this solution, if it get's founded, I would like to have >> just some more high power switching. >> >> Is their any soluition you would recommend to buy for building my CNC-Box >> with a Beagle Bone Black. >> >> OR does anyone has a starting point for building my own Solution step by >> step. >> I looked at the chips they use, they are from trinamic motion control and >> able to get from retailer, so may i could build my own test controller with >> those chips. I would just need the 3 CNC Axis System for now. >> And I also ordered the t-bone board which will become open Hardware but >> need something for now or for an alternative when it didn't get >> successfully founded. >> >> So is anybody interested in building up a breadbord version for 3 axis >> controll with beagle bone black, based on the trinamic chips: - TMC2660-PA >> and TMC429-LI ?? >> >> May there are some geniuses which could help build it, just cause they >> can an I don't ;-) >> >> Any suggestion would be appreciated >> >> Thx >> >> Markus >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/DU6acSSCyrg/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
