Hi, I flash the eMMC of BEAGLEBONE BLACK with debian (BBB-eMMC-flasher-debian-7.4-2014-04-14-2gb.img.xz) and then I replace 2 files "MLO" and "u-boot.img" , also in the microSD remplaze files, it is noteworthy that the microSD is loaded ubuntu 13.04
Regards On Mon, May 5, 2014 at 9:47 AM, <[email protected]> wrote: > Hi, > > Thanks a lot to all of you guys for this effort... > > I have been stuck for weeks with 50+ beagle's that wouldn't reboot (or > startup) 1/10 times... > It is driving me crazy... > > Do I really assume correctly that all that is needed to fix this is > replace the two files? > No flashing or otherwise "enabling" the changes? > > I'm testing with one of them now and sofar it's coming back every time, > but I have no idea how to really check if the changes did "stick" > (they're all in a remote location) > > Thanks, Tony > > On Wednesday, April 23, 2014 5:36:11 PM UTC+2, [email protected] wrote: >> >> Hello, >> Basing on the correct answer of Andrew Glen,I attach the link of the >> compiled files to avoid the boot problem, you just need to replace the >> original files "MLO" and "u-boot.img" on eMMC and SD card, sorry for my bad >> english, regards: >> >> https://www.dropbox.com/sh/98xacnk466xfpza/uTlii1hrsg >> >> El miércoles, 31 de julio de 2013 16:48:54 UTC-5, >> [email protected]ó: >>> >>> Hi guys, >>> >>> we have a problem with our Beagle Bone Black (A5C). We are using Ubuntu >>> Raring 13.04 armhf v3.8.13-bone21 (2013-06-14) on the eMMC (no SD Card). >>> The Beagle Bone is placed in a case and we have connected it to a DC power >>> supply. Sometimes (I would say every 5 to 10 times), when we are plugging >>> in our power supply, the BeagleBone powers on (Power LED is on), but >>> nothing more happens (none of the other four LEDs is on). If we are now >>> removing the power supply and putting it in again, the BBB starts normally. >>> I guess the power supply is strong enough: 5A@5V. >>> >>> Thanks for your help in advance. >>> >>> Regards, >>> duckhunter >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
