The ROM as you call it is inside the processor. You need to provide code either in the SD card or the eMMC for the board to boot.
http://www.elinux.org/Beagleboard:BeagleBoneBlack Gerald On Thu, May 8, 2014 at 5:44 AM, <[email protected]> wrote: > > Hi to all, > I'm imagine to build a BeagleBoneBlack from scratch and I'm in doubt about > the ROM that will boot all the system. Infact if I assemble all the stuff > and I power it up, I undestand that nothing will happen if I dont do some > minimal programming (I guess I would flash something at low level...) > > Have anybody tried to do something similar? > > Thank you > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
