Done. Gerald
On Thu, May 22, 2014 at 3:33 PM, Gerald Coley <[email protected]>wrote: > I will add it to the manual. But then again, I just decided this today, so > I would appreciate giving me a little time to get it in there. > > Gerald > > > > On Thu, May 22, 2014 at 3:28 PM, John Syn <[email protected]> wrote: > >> >> From: Gerald Coley <[email protected]> >> Reply-To: <[email protected]> >> Date: Thursday, May 22, 2014 at 12:25 PM >> To: "[email protected]" <[email protected]> >> Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes >> Once >> >> You should be able to just press the power button once briefly and it >> shutdown. Assuming the image you are running has it. The latest image does >> have it. >> >> After it powers down, then you can remove the power. We need to make sure >> the PMIC powers down all the rails to the processor in order. >> >> Or you can enter “halt” on the console or terminal window and it will >> power off. >> >> Regards, >> John >> >> >> >> Gerald >> >> >> >> On Thu, May 22, 2014 at 2:17 PM, Miroslav Rudišin <[email protected]>wrote: >> >>> By powering down you mean either: >>> - issuing power off sequence from the OS >>> - holding power button for 8 seconds >>> >>> Or is it also good enough just disconnecting power supply from wall >>> outlet? >>> >>> Thanks. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
