Non imperative was the idea. Gerald
On Thu, May 22, 2014 at 7:02 PM, Miroslav Rudišin <[email protected]> wrote: > Yes, I see it in the C.1 doc. It could be more imperative than just > recomendation, but it is there. Thanks for fast action. > > > On Thursday, May 22, 2014 11:48:19 PM UTC+2, Gerald wrote: > >> Done. >> >> Gerald >> >> >> On Thu, May 22, 2014 at 3:33 PM, Gerald Coley <[email protected]>wrote: >> >>> I will add it to the manual. But then again, I just decided this today, >>> so I would appreciate giving me a little time to get it in there. >>> >>> Gerald >>> >>> >>> >>> On Thu, May 22, 2014 at 3:28 PM, John Syn <[email protected]> wrote: >>> >>>> >>>> From: Gerald Coley <[email protected]> >>>> Reply-To: <[email protected]> >>>> >>>> Date: Thursday, May 22, 2014 at 12:25 PM >>>> To: "[email protected]" <[email protected]> >>>> >>>> Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes >>>> Once >>>> >>>> You should be able to just press the power button once briefly and it >>>> shutdown. Assuming the image you are running has it. The latest image does >>>> have it. >>>> >>>> After it powers down, then you can remove the power. We need to make >>>> sure the PMIC powers down all the rails to the processor in order. >>>> >>>> Or you can enter “halt” on the console or terminal window and it will >>>> power off. >>>> >>>> Regards, >>>> John >>>> >>>> >>>> >>>> Gerald >>>> >>>> >>>> >>>> On Thu, May 22, 2014 at 2:17 PM, Miroslav Rudišin <[email protected]>wrote: >>>> >>>>> By powering down you mean either: >>>>> - issuing power off sequence from the OS >>>>> - holding power button for 8 seconds >>>>> >>>>> Or is it also good enough just disconnecting power supply from wall >>>>> outlet? >>>>> >>>>> Thanks. >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
