btw, is there a non-flasher version of https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-2014-05-15-2gb.img.xz <https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-2014-05-15-2gb.img.xz>available or what happens if I put this image into a board (white) that has no eMMC onboard? just how badly will it barf and what exactly do I end up with?
Eric <https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-2014-05-15-2gb.img.xz> On Sun, Jun 1, 2014 at 6:29 PM, Robert Nelson <[email protected]> wrote: > > actually, for lack of hitting send immediately, I'm using the > > > https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-2014-05-15-2gb.img.xz > > image and it's pretty sweet. only a couple hunderd MB used with lots of > > space left (as it should be). The network even works with dhclient > > preinstalled and running on eth0 so it gets assigned an address on my > > network via dhcp and I can ssh in. Couple things I noticed as being > > different though. first off one has to login as Debian:temppwd (no root > > login, and password required), > > Yeap, out of the box it's a little more secure via personal > preference. The beagleboard.org image has root enabled by default to > help transition people from Angstrom.. > > You can get root back by: > > sudo passwd root > > (to disable) > sudo passwd -l root > > I blanked out the root password, ssh, sudo/etc via: > > > https://github.com/beagleboard/image-builder/blob/master/target/chroot/beagleboard.org.sh#L456 > > > > sudo must be used (which one should probably > > do anyway), and reboot/shutdown/halt/poweroff are all missing (probably > for > > They exist, it's just that a normal user doesn't have /sbin/ in the > path, i patched the bb.org image with: > > > https://github.com/RobertCNelson/boot-scripts/blob/master/mods/debian-add-sbin-usr-sbin-to-default-path.diff > > So, "sudo reboot" works, but "reboot" doesn't. > > > > lack of the systemd package) so the only means to reboot the machine is > via > > pulling the power plug (or possibly pressing reset which I didn't think > of > > until just now....) both of which require physical access to the machine. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
