On Monday, June 9, 2014 8:23:55 PM UTC+5:30, RobertCNelson wrote: > > > > > On Mon, Jun 9, 2014 at 8:41 AM, Chaitra MohanKumar < > [email protected] <javascript:>> wrote: > >> Hello everyone, >> >> I am using Beaglebone Black, I am trying to run UBUNTU 14.04 from the SD >> card. I followed the procedure as mentioned in the website >> http://eewiki.net/display/linuxonarm/BeagleBone#BeagleBone-Ubuntu14.04 >> to burn OS on the SD card. >> >> But when I power on the board, the only thing visible is "LINUX PENGUIN >> LOGO" on the top left corner of the screen as shown in the below figure. >> >> >> - Can I know what is the problem happening to display only this logo? >> >> >> - Is it a boot loader problem or something else? >> >> >> Please let me know what is the problem and also how to resolve it. >> > > It looks like it is booting fine, what do you see over serial? > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ >
Hi, Thank you for the reply. I tried SSHing into beaglebone black, but it s not happening. The serial output is as follows: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.06.10 14:20:14 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2014.04-dirty (Jun 05 2014 - 18:58:53) reading args spl_load_image_fat_os: error reading image args, err - -1 reading u-boot.img reading u-boot.img U-Boot 2014.04-dirty (Jun 05 2014 - 18:58:53) I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 1 0 gpio: pin 53 (gpio 53) value is 1 mmc0 is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 0 reading uEnv.txt 238 bytes read in 14 ms (16.6 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... reading /zImage 5502744 bytes read in 301 ms (17.4 MiB/s) reading /dtbs/am335x-boneblack.dtb 25926 bytes read in 9 ms (2.7 MiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x53f718 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88009545 Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13-bone56 (chaitra@UbuntuSystech) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jun 6 14:31:52 IST 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] AM335X ES2.0 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0d0d000 s14080 r8192 d14592 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/sdb2 ro rootfstype=ext4 rootwait fixrtc [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 508412k/508412k available, 15876k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc07bfca4 (7904 kB) [ 0.000000] .init : 0xc07c0000 - 0xc07fc700 ( 242 kB) [ 0.000000] .data : 0xc07fe000 - 0xc0885600 ( 542 kB) [ 0.000000] .bss : 0xc0885600 - 0xc08fcd40 ( 478 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:0 nr_irqs:0 0 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000235] Calibrating delay loop... 993.47 BogoMIPS (lpj=969728) [ 0.029184] pid_max: default: 32768 minimum: 301 [ 0.029320] Security Framework initialized [ 0.029376] Mount-cache hash table entries: 512 [ 0.034980] Initializing cgroup subsys cpuacct [ 0.035004] Initializing cgroup subsys memory [ 0.035078] Initializing cgroup subsys blkio [ 0.035170] CPU: Testing write buffer coherency: ok [ 0.035539] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.035594] Setting up static identity map for 0x804a3038 - 0x804a3084 [ 0.036523] Brought up 1 CPUs [ 0.036539] SMP: Total of 1 processors activated (993.47 BogoMIPS). [ 0.037324] devtmpfs: initialized [ 0.045761] omap_hwmod: wd_timer2: _wait_target_disable failed [ 0.097865] pinctrl core: initialized pinctrl subsystem [ 0.098001] rstctl core: initialized rstctl subsystem [ 0.098293] regulator-dummy: no parameters [ 0.098610] NET: Registered protocol family 16 [ 0.099139] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.104735] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.105292] platform 49000000.edma: alias fck already exists [ 0.105308] platform 49000000.edma: alias fck already exists [ 0.105321] platform 49000000.edma: alias fck already exists [ 0.106050] OMAP GPIO hardware version 0.1 [ 0.108509] gpio-rctrl rstctl.4: loaded OK [ 0.111692] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.112926] cpsw.0: No hwaddr in dt. Using 90:59:af:69:bd:4d from efuse [ 0.112945] cpsw.1: No hwaddr in dt. Using 90:59:af:69:bd:4f from efuse [ 0.121121] bio: create slab <bio-0> at 0 [ 0.127416] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.127691] vmmcsd_fixed: 3300 mV [ 0.129284] SCSI subsystem initialized [ 0.129520] usbcore: registered new interface driver usbfs [ 0.129579] usbcore: registered new interface driver hub [ 0.129773] usbcore: registered new device driver usb [ 0.131012] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.131921] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.133529] DCDC1: at 1500 mV [ 0.134359] vdd_mpu: 925 <--> 1325 mV at 1325 mV [ 0.135215] vdd_core: 925 <--> 1150 mV at 1125 mV [ 0.136014] LDO1: at 1800 mV [ 0.136801] LDO2: at 3300 mV [ 0.138283] LDO3: 1800 mV [ 0.139133] LDO4: at 3300 mV [ 0.139848] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.140308] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.140831] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.142202] omap_i2c 4819c000.i2c: unable to select pin group [ 0.142351] media: Linux media interface: v0.10 [ 0.142416] Linux video capture interface: v2.00 [ 0.142553] pps_core: LinuxPPS API ver. 1 registered [ 0.142563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.142962] Advanced Linux Sound Architecture Driver Initialized. [ 0.143541] NetLabel: Initializing [ 0.143552] NetLabel: domain hash size = 128 [ 0.143558] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.143625] NetLabel: unlabeled traffic allowed by default [ 0.143804] Switching to clocksource gp_timer [ 0.174895] NET: Registered protocol family 2 [ 0.175583] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.175667] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.175761] TCP: Hash tables configured (established 4096 bind 4096) [ 0.175821] TCP: reno registered [ 0.175836] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.175861] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.176097] NET: Registered protocol family 1 [ 0.176490] RPC: Registered named UNIX socket transport module. [ 0.176501] RPC: Registered udp transport module. [ 0.176508] RPC: Registered tcp transport module. [ 0.176515] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.176974] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.177328] CPU PMU: attempt to register multiple PMU devices! [ 0.177354] arm-pmu: probe of arm-pmu failed with error -28 [ 0.177625] omap2_mbox_probe: platform not supported [ 0.329263] VFS: Disk quotas dquot_6.5.2 [ 0.329487] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.330225] NFS: Registering the id_resolver key type [ 0.330294] Key type id_resolver registered [ 0.330304] Key type id_legacy registered [ 0.330577] fuse init (API version 7.20) [ 0.330963] Btrfs loaded [ 0.331057] msgmni has been set to 992 [ 0.332684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.332701] io scheduler noop registered [ 0.332709] io scheduler deadline registered [ 0.332730] io scheduler cfq registered (default) [ 0.333913] tps65217-bl tps65217-bl: no platform data provided [ 0.333938] tps65217-bl: probe of tps65217-bl failed with error -22 [ 0.334447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.335808] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.336082] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0 [ 1.078506] console [ 1.305987] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 1.312196] bone-capemgr bone_capemgr.9: slot #4: specific override [ 1.318755] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4 [ 1.326761] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G' [ 1.336819] bone-capemgr bone_capemgr.9: slot #5: specific override [ 1.343386] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5 [ 1.351385] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI' [ 1.361345] bone-capemgr bone_capemgr.9: slot #6: specific override [ 1.367904] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6 [ 1.375903] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN' [ 1.386312] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 1.395131] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 1.403919] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 1.412659] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 1.421314] bone-capemgr bone_capemgr.9: initialized OK. [ 1.426880] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.435691] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.446101] OneNAND driver initializing [ 1.451037] usbcore: registered new interface driver cdc_ether [ 1.457173] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 1.465964] usbcore: registered new interface driver rndis_host [ 1.472204] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 1.480853] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.489639] usbcore: registered new interface driver cdc_ncm [ 1.495577] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0' [ 1.509568] usbcore: registered new interface driver cdc_acm [ 1.515500] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.523854] Initializing USB Mass Storage driver... [ 1.528961] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree [ 1.539621] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0' [ 1.553769] usbcore: registered new interface driver usb-storage [ 1.560057] USB Mass Storage support registered. [ 1.565082] bone-capemgr bone_capemgr.9: slot #4: #2 overlays [ 1.571705] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays. [ 1.578535] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 1.587200] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.595946] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree [ 1.607269] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 1.613817] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 1.619030] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 1.628343] bone-capemgr bone_capemgr.9: slot #5: #4 overlays [ 1.635697] platform 4830e000.fb: alias fck already exists [ 1.641688] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 1.646725] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 1.652924] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays. [ 1.659812] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 1.668384] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.677568] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 1.682788] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 1.691539] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00Amap_hsmmc mmc.5: pins are not configured from the driver [ 1.942929] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn [ 1.949067] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn [ 1.957025] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn [ 1.963355] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3 [ 1.970431] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2 [ 1.977784] mmc.11 supply vmmc_aux not found, using dummy regulator [ 1.984451] omap_hsmmc mmc.11: pins are not configured from the driver [ 2.019242] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 2.030911] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 2.038195] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 2.047134] leds-gpio gpio-leds.8: pins are not configured from the driver [ 2.055078] ledtrig-cpu: registered to indicate activity on CPUs [ 2.061673] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 2.068858] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.076277] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.082509] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 2.089638] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 2.099711] usbcore: registered new interface driver usbhid [ 2.105602] usbhid: USB HID core driver [ 2.110505] ashmem: initialized [ 2.113895] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.122613] logger: created 256K log 'log_main' [ 2.127610] logger: created 256K log 'log_events' [ 2.132662] mmc0: new high speed SDHC card at address aaaa [ 2.138596] logger: created 256K log 'log_radio' [ 2.143888] mmcblk0: mmc0:aaaa SS08G 7.40 GiB [ 2.148760] logger: created 256K log 'log_system' [ 2.155165] mmcblk0: p1 p2 [ 2.160905] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok [ 2.170600] TCP: cubic registered [ 2.174211] NET: Registered protocol family 10 [ 2.179691] NET: Registered protocol family 17 [ 2.184646] Key type dns_resolver registered [ 2.189298] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.197412] ThumbEE CPU extension supported. [ 2.201913] Registering SWP/SWPB emulation handler [ 2.207603] registered taskstats version 1 [ 2.213644] tilcdc 4830e000.fb: No power control GPIO [ 2.327967] tilcdc 4830e000.fb: found TDA19988 [ 2.333212] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.340133] [drm] No driver support for vblank timestamp query. [ 2.346595] tilcdc 4830e000.fb: No connectors reported connected with modes [ 2.353910] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.369003] Console: switching to colour frame buffer device 128x48 [ 2.381254] tilcdc 4830e000.fb: fb0: frame buffer device [ 2.386899] tilcdc 4830e000.fb: registered panic notifier [ 2.392571] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 [ 2.446621] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.453009] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.460232] libphy: 4a101000.mdio: probed [ 2.464469] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.474219] Detected MACID = 90:59:af:69:bd:4d [ 2.478813] cpsw 4a100000.ethernet: NAPI disabled [ 2.485058] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.498737] ALSA device list: [ 2.501902] #0: TI BeagleBone Black [ 2.506335] Waiting for root device /dev/sdb2... [ 2.660973] mmc1: BKOPS_EN bit is not set [ 2.667609] mmc1: new high speed MMC card at address 0001 [ 2.673806] mmcblk1: mmc1:0001 MMC02G 1.78 GiB [ 2.678788] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.685184] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.693634] mmcblk1: p1 p2 [ 2.698420] mmcblk1boot1: unknown partition table [ 2.704927] mmcblk1boot0: unknown partition table What might be the reason for the above log? Is it the mistake with sd card partition? Thank you. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
