> > *It's not weak, It's empty. But, my focus was using a easier* > * cross-compiler rather than building my own.* > * I will get crosstool-ng when I have more time to test before I publish.*
You have a problem with the Linaro toolchain ? That is what is used for uboot and the kernel . . . On Sat, Jul 26, 2014 at 8:50 AM, Lucas Tanure <[email protected]> wrote: > On Fri, Jul 25, 2014 at 11:43 PM, Douglas Jerome <[email protected]> > wrote: > > On 07/25/14 11:43, Lucas Tanure wrote: > >> > >> Robert, > >> > >> I have a BBB and I wrote http://elinux.org/Building_for_BeagleBone. > >> So, I'm looking for something to do when I finish the eudyptula > challenge. > >> I'm thinking in work for BBB be better supported in mainline. > >> > >> I was thinking if I can run mainline in BBB what Robert has in his tree > >> that should be in mainline in order to better support BBB. > >> > >> Thanks > >> Tanure > > > > > > Hi Lucas, > > > > the part about crosstool-ng is pretty weak. You also need to > > have kernel header files to build a cross tool chain with > > crosstool-ng. > > It's not weak, It's empty. But, my focus was using a easier > cross-compiler rather than building my own. > I will get crosstool-ng when I have more time to test before I publish. > > > > > Building your own kernel for BeagleBone is no easy trick, > > getting the kernel header files exported from RCN's tree > > has been a bothersome pain for the 3.8 tree. > > reference: http://ttylinux.net/dloadBBN.html > > Why I need to do that ? I think that 3.15 runs in BBB just fine, right ? > I just need more time to build my rootfs and I'm good to go. > > > > > If you like, I can give you information to make that page > > you wrote on elinux.org to be more useful. > > > > Cheers... > > Yes, of course, send me what you think that can improve or go there and > edit. > We can talk a lot and improve, so anyone can benefit. > > Thanks > Lucas Tanure > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
