omap3beagle is for BeagleBoard and BeagleBoard-XM, don't touch this file as for I2C you need to change pin mux settings for particular pins. I think it's even possible to change the pin mux settings right in the working OS, using the /sys directory. Unfortunately I don't know how
2014-07-29 2:53 GMT+04:00 <[email protected]>: > Hi there. > I would like to use both CAN0 and CAN1 on my beaglebone black. > I followed tutorial on this page; > http://www.embedded-things.com/bbb/enable-canbus-on-the-beaglebone-black/ > > CAN0 works for a start but the board restarts after a while. > Works properly when CAN0 is not used, so I am guessing I2C2 is the problem. > http://pastebin.com/L0BLMwYR > > I think that board-omap3beagle.c kernel file needs to modified. > But I am not skilled enough to do edit it. > > Can anyone help me to diable I2C2 entirely? > > Kind Regards > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- LinkedIn - http://www.linkedin.com/in/maximpodbereznyy Company - http://www.linkedin.com/company/mentorel Facebook - https://www.facebook.com/mentorel.company -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
