Just make sure the usb cable will charge a cell phone or any other device to make sure you have power.
Tim On Monday, August 18, 2014 1:15:01 AM UTC-5, Jeff Hughes wrote: > > Hey there. Pretty sure my BeagleBone Black is dead but it would be good if > someone could confirm. I got it in an OpenROV kit along with an arduino > board for controlling motors and other stuff. Everything worked fine for a > few days, but then the whole thing stopped responding. I hadn't really > looked closely at the BBB prior to this, so I don't know if any of the LEDs > on the board were lighting up when running but I would assume so. Anyway > to troubleshoot the problem I connected the BBB itself to a USB cable from > my computer which should power the board but... nothing. No LEDs come on. > Not even the power LED over by the 5V power supply connector (which I am > not using). > > Is there something else I should try? Any diagnostics I could run? Or key > points on the PCB where I should check voltage levels? I don't have the 5V > power supply so I'm sortof stuck with USB to power the card. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
