From: <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Monday, August 25, 2014 at 11:59 PM To: "[email protected]" <[email protected]> Subject: [beagleboard] permanently enable i2c1 on beaglebone black
> Hi, > > I'm building a project with a beaglebone black for which I need an i2C > channel. Since I need address 0x56 I need to use i2c1(i2c-2) because > i2c2(i2c-1) blocks certain addresses for the capes. I've found this command to > activate it: > >> echo BB-I2C1 > /sys/devices/bone_capemgr.*/slots > > and it works till reboot. Is there a way to activate it permanently You do this by editing uEnv.txt Regards, John > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
