Of course! Because changing u-boot environment variables means nothing for SPL bootloader :) 07 Сен 2014 г. 16:11 пользователь "pavan B.G" <[email protected]> написал:
> Hello John , > > I applied the patch,cross compiled U-boot and tried but its still the > same ..:( > > > Regards > Pavan > > > > On 7 September 2014 13:12, John Syn <[email protected]> wrote: > >> >> From: pavan <[email protected]> >> Reply-To: "[email protected]" <[email protected]> >> Date: Saturday, September 6, 2014 at 11:39 PM >> To: "[email protected]" <[email protected]> >> Subject: [beagleboard] BeagleBoard XM rev c Boot Issue >> >> >> Hello , >> >> >> I recently tried compiling and booting a fresh kernel and U-boot on >> Beagleboard -Xm rev c , i get the following error during board bootup >> >> >> U-Boot SPL 2014.10-rc2 (Sep 06 2014 - 18:31:00) >> SPL: Please implement spl_start_uboot() for your board >> SPL: Direct Linux boot not active! >> reading u-boot.img >> spl_load_image_fat: error reading image u-boot.img, err - -1 >> ### ERROR ### Please RESET the board ### >> >> >> Resetting the board dosen't help . >> >> The default angstrom distro i got from factory works very fine and the >> board boots .So there is no issue with the board .Please help me regarding >> this . >> >> I cloned the U-boot source via this *git clone >> git://git.denx.de/u-boot.git <http://git.denx.de/u-boot.git> u-boot/* >> >> Did you patch u-boot? >> >> >> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot >> >> But for the Beagle-xM you >> use 0001-omap3_beagle-uEnv.txt-bootz-n-fixes.patch >> >> Regards, >> John >> >> >> >> >> >> *Thanks and regards.* >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
