Hi Maxim , Please let me know how to proceed further ....???
On 7 September 2014 18:56, Maxim Podbereznyy <[email protected]> wrote: > Of course! Because changing u-boot environment variables means nothing for > SPL bootloader :) > 07 Сен 2014 г. 16:11 пользователь "pavan B.G" <[email protected]> написал: > > Hello John , >> >> I applied the patch,cross compiled U-boot and tried but its still the >> same ..:( >> >> >> Regards >> Pavan >> >> >> >> On 7 September 2014 13:12, John Syn <[email protected]> wrote: >> >>> >>> From: pavan <[email protected]> >>> Reply-To: "[email protected]" <[email protected]> >>> Date: Saturday, September 6, 2014 at 11:39 PM >>> To: "[email protected]" <[email protected]> >>> Subject: [beagleboard] BeagleBoard XM rev c Boot Issue >>> >>> >>> Hello , >>> >>> >>> I recently tried compiling and booting a fresh kernel and U-boot on >>> Beagleboard -Xm rev c , i get the following error during board bootup >>> >>> >>> U-Boot SPL 2014.10-rc2 (Sep 06 2014 - 18:31:00) >>> SPL: Please implement spl_start_uboot() for your board >>> SPL: Direct Linux boot not active! >>> reading u-boot.img >>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>> ### ERROR ### Please RESET the board ### >>> >>> >>> Resetting the board dosen't help . >>> >>> The default angstrom distro i got from factory works very fine and the >>> board boots .So there is no issue with the board .Please help me regarding >>> this . >>> >>> I cloned the U-boot source via this *git clone >>> git://git.denx.de/u-boot.git <http://git.denx.de/u-boot.git> u-boot/* >>> >>> Did you patch u-boot? >>> >>> >>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot >>> >>> But for the Beagle-xM you >>> use 0001-omap3_beagle-uEnv.txt-bootz-n-fixes.patch >>> >>> Regards, >>> John >>> >>> >>> >>> >>> >>> *Thanks and regards.* >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
