Some reason you can't just use one of the other UARTs? It's very handy to have a serial console for debugging.
On Thursday, September 11, 2014 10:29:48 AM UTC-7, jgold wrote: > > I've got a RS232 micro cape > http://www.logicsupply.com/components/beaglebone/capes/cbb-ttl-232/ that > I need to use as a serial port. The problem is that by default /dev/ttyO0 > is setup as a login console. I need to disable that so that I can use the > port for my own purposes. > > I've found instructions for how to do it on Rasbian but I can't find > anything for the Beaglebone. I found a line in /etc/inittab that looked > like it was starting a getty session on /dev/ttyO0 and I commented it out > but after a reboot, the login is still there. > > I found some references to inittab being obsolete because systemd doesn't > use it but I can't find anything to configure systemd so it doesn't use > ttyO0. > > Can anyone point me in the right direction? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
