Have the schematic posted somewhere? Versus this one: http://elinux.org/images/1/11/Audio_Cape_B1_Schematic.pdf
On Tue, Sep 16, 2014 at 9:09 PM, Prakash Parmar <[email protected]> wrote: > Hi, > > Schematic wise both are same. > > On Wed, Sep 17, 2014 at 2:51 AM, Jesse Cobra <[email protected]> wrote: > >> OK, and what is different between your board and CircuitCo schematic wise? >> On Sep 16, 2014 8:53 AM, "Prakash Parmar" <[email protected]> >> wrote: >> >>> Hi, >>> >>> Here CircuitCo cape is not available So we decided to make our own. >>> >>> >>> On Tue, Sep 16, 2014 at 7:20 PM, Jesse Cobra <[email protected]> >>> wrote: >>> >>>> What happens when you try the CircuitCO audio cape? >>>> Does it work fine? >>>> >>>> On Mon, Sep 15, 2014 at 10:14 PM, Prakash Parmar < >>>> [email protected]> wrote: >>>> >>>>> Hi, >>>>> >>>>> How I can check this two things ? >>>>> >>>>> 2) check if SYS_RESET is actually deasserted and high >>>>> 3) check if DIN/DOUT are correctly connected and not flipped, because >>>>> DIN data must go into CODEC, while DOUT must go out and vise versa >>>>> >>>>> I'm not clear about this. Actually I have two Boards one with 10K >>>>> resistors and one with 4.6K . >>>>> >>>>> Thanks & Regards, >>>>> Prakash P. >>>>> >>>>> On Tue, Sep 16, 2014 at 12:34 AM, Maxim Podbereznyy < >>>>> [email protected]> wrote: >>>>> >>>>>> what is exactly not clear for you? >>>>>> >>>>>> how to change resistors or how to copy/paste commands in a shell? >>>>>> >>>>>> 2014-09-15 21:46 GMT+04:00 <[email protected]>: >>>>>> >>>>>>> HI, >>>>>>> Thanks For reply. >>>>>>> >>>>>>> Can you please tell me how I can Do that ? >>>>>>> >>>>>>> >>>>>>> Thanks & Regards, >>>>>>> Prakash P. >>>>>>> >>>>>>> On Monday, September 15, 2014 8:01:19 PM UTC+5:30, liyaoshi wrote: >>>>>>>> >>>>>>>> Have you config the i2c pin pulled up ? >>>>>>>> and >>>>>>>> whats the speed of your i2c bus ? >>>>>>>> >>>>>>>> 2014-09-15 2:09 GMT+08:00 <[email protected]>: >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I have made custom Audio cape using TLV320AIC3107. Here is a >>>>>>>>> circuit diagram : >>>>>>>>> >>>>>>>>> >>>>>>>>> <http://e2e.ti.com/cfs-file.ashx/__key/telligent-evolution-components-attachments/00-64-01-00-01-29-55-62/audio.png> >>>>>>>>> >>>>>>>>> >>>>>>>>> I make it same ( Pin configurations and all ) as what is >>>>>>>>> available at CircuitCO using TLC320AIC3104 codec. I follow All steps >>>>>>>>> like >>>>>>>>> Disable HDMI and Load Device Tree BB-BONE-AUDI-02-00A0.dts and I it >>>>>>>>> works >>>>>>>>> fine. >>>>>>>>> >>>>>>>>> But my problem is when I run speaker-test system hangs (freezes) >>>>>>>>> and I have to Hard Reset BeagleBone. >>>>>>>>> >>>>>>>>> Here is what i did and what I get in dmesg. >>>>>>>>> >>>>>>>>> >>>>>>>>> *root@beaglebone:~# speaker-test * >>>>>>>>> >>>>>>>>> speaker-test 1.0.25 >>>>>>>>> >>>>>>>>> Playback device is default >>>>>>>>> Stream parameters are 48000Hz, S16_LE, 1 channels >>>>>>>>> Using 16 octaves of pink noise >>>>>>>>> Rate set to 48000Hz (requested 48000Hz) >>>>>>>>> Buffer size range from 128 to 32768 >>>>>>>>> Period size range from 8 to 2048 >>>>>>>>> Using max buffer size 32768 >>>>>>>>> Periods = 4 >>>>>>>>> >>>>>>>>> >>>>>>>>> *And in Dmesg : * >>>>>>>>> >>>>>>>>> [ 205.540653] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 206.572921] omap_i2c 4819c000.i2c: controller timed out >>>>>>>>> [ 206.580024] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 207.611983] omap_i2c 4819c000.i2c: controller timed out >>>>>>>>> [ 207.618668] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 212.626062] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 213.658853] omap_i2c 4819c000.i2c: controller timed out >>>>>>>>> [ 213.666881] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 214.699867] omap_i2c 4819c000.i2c: controller timed out >>>>>>>>> [ 214.707912] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> [ 215.740887] omap_i2c 4819c000.i2c: controller timed out >>>>>>>>> [ 215.748952] omap_i2c 4819c000.i2c: Arbitration lost >>>>>>>>> >>>>>>>>> >>>>>>>>> I also cross check device tree file and I found that it also works >>>>>>>>> for TLV320AIC3107 codec So I think it is not issue. >>>>>>>>> >>>>>>>>> An one have Idea what is wrong Please Help ME !!!! >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks & Regards >>>>>>>>> >>>>>>>>> Prakash P. >>>>>>>>> >>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> LinkedIn - http://www.linkedin.com/in/maximpodbereznyy >>>>>> Company - http://www.linkedin.com/company/mentorel >>>>>> Facebook - https://www.facebook.com/mentorel.company >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "BeagleBoard" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/beagleboard/0ickf2E6NNs/unsubscribe >>>>>> . >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/beagleboard/0ickf2E6NNs/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/0ickf2E6NNs/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
