On Oct 4, 2014 11:43 AM, "Curt Carpenter" <[email protected]> wrote:
>
> Yes, I've done all that and can run the BoneScript examples and so forth
and use PuTTY to browse the board.  Also googled things like "beaglebone
debian DNS" but found nothing I could understand that would let me use
apttitude from the board.
>
> Thank you for your time anyway.  I'll try here again later.

You need to setup internet connection sharing on your windows box and route
it to the USB network device.  Or just use an Ethernet cable and network
switch as that is way easier.

>
>
> On Saturday, October 4, 2014 10:56:41 AM UTC-5, Wulf Man wrote:
>>
>> http://beagleboard.org/Getting+Started
>>
>>
>> On 10/4/2014 8:17 AM, Curt Carpenter wrote:
>>>
>>> Thank you for the help wulfman.
>>>
>>> When I enter
>>>
>>> root@beaglebone:~# nslookup ftp.us.debian.org
>>>
>>> the response is
>>>
>>> -bash: nslookup: command not found.
>>>
>>> I don't seem to be able to ping any address either.  Should I be able
to do this without having a LAN cable connected to the BBB?
>>>
>>> I've taken no steps to set up any networking capability on my board,
and suspect that this may be my problem.  Can you point me to any docs or
tutorials that might help me?  My knowledge of Linux networking is VERY
limited!
>>>
>>> Thanks again!
>>>
>>>
>>> --
>>> For more options, visit http://beagleboard.org/discuss
>>> ---
>>> You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
>>>
>>> For more options, visit https://groups.google.com/d/optout.
>>
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
> For more options, visit https://groups.google.com/d/optout.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to