Hello, after nearly 2 weeks of struggling my first LED blinking works under the following constitution: -) Beaglebone black, Element14, rev.C -) no OS --> holding "boot" button, when powering -) Code Composure Studio v6 -) Starterware (without BBB patch: http://software-dl.ti.com/dsps/dsps_public_sw/am_bu/starterware/latest/index_FDS.html (DOES NOT WORK AT THE MOMENT) -) XDS100v2 emulator
1.) The maximum frequency for toggling the pin is 1.6 MHz, but I need maximum speed. In my understanding there is still a speed decrease as the system is running in *emulation *mode. Correct? 2.) >From the build process of CCS I have got a .out file. *What are the next steps to get the program running from the SD card?* Please be very precise - I have already heard of MOL, u-boot, GEL file,...., but there does not seem to be a step-by-step tutorial. 3.) *What are the next steps to get the program running from the eMMC?* You see, I want to do bare-metal C programming, without linux or any other OS, as I must operate (pin toggling, computations,...) as fast as possible. Your help is very appreciated! Reinhard -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
