Hi Reinhard, regarding pin toggling this link might be useful: http://e2e.ti.com/support/embedded/starterware/f/790/t/366081.aspx
Regards, Martin H. Am Montag, 20. Oktober 2014 15:23:46 UTC+2 schrieb [email protected]: > > Hello, > > after nearly 2 weeks of struggling my first LED blinking works under the > following constitution: > -) Beaglebone black, Element14, rev.C > -) no OS --> holding "boot" button, when powering > -) Code Composure Studio v6 > -) Starterware (without BBB patch: > > http://software-dl.ti.com/dsps/dsps_public_sw/am_bu/starterware/latest/index_FDS.html > > (DOES NOT WORK AT THE MOMENT) > -) XDS100v2 emulator > > 1.) > The maximum frequency for toggling the pin is 1.6 MHz, > but I need maximum speed. > In my understanding there is still a speed decrease as the system is > running in *emulation *mode. > Correct? > > 2.) > From the build process of CCS I have got a .out file. > *What are the next steps to get the program running from the SD card?* > Please be very precise - I have already heard of MOL, u-boot, GEL > file,...., > but there does not seem to be a step-by-step tutorial. > > 3.) > *What are the next steps to get the program running from the eMMC?* > > > You see, I want to do bare-metal C programming, without linux or any other > OS, > as I must operate (pin toggling, computations,...) as fast as possible. > > > Your help is very appreciated! > > Reinhard > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
