On 10/24/14, 7:54 AM, "Robert Nelson" <[email protected]> wrote:
>On Fri, Oct 24, 2014 at 9:47 AM, Dennis Cote <[email protected]> wrote: >> I tried to flash my BBB rev A5C with the 2014-10-22 Debian Jessie lxqt >> flasher from >> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-10-22. The >> flashing never completed, at least the user LEDs never changed from the >> cylon flashing pattern. I left the board run overnight. I have attached >>a >> log from the serial debug port. >> >> Just in case the flasher had worked even though it never completed, I >>tried >> booting from the eMMC. This started but dropped out to a shell. I have >>also >> attached a log from the serial console for that boot. >> >> My BBB correctly boots and runs the 2014-10-22 standalone lxde image >>from >> the same site using a different SD card. >> >> I verified the md5sum of the image file I downloaded. >> >> Any idea why the flasher fails? Has anyone else used this flasher >> successfully? > >Odd.. > >----------------------------- >Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 >rsync: /boot/uboot/ -> /tmp/boot/ > >Copying: /dev/mmcblk0p2 -> /dev/mmcblk1p2 > >[ 585.521293] EXT4-fs (mmcblk1p2): mounted filesystem with ordered >data mode. Opts: (null) >rsync: / -> /tmp/rootfs/ > >Give it another run, it should only take about 10 minutes.. I should >find a switch for a progress bar in rsync.. I don¹t think there is one, but I usually use rsync -avz which displays the files being copied. Might be a bit slower, but at least you can see what¹s happening. Regards, John > >Regards, > >-- >Robert Nelson >http://www.rcn-ee.com/ > >-- >For more options, visit http://beagleboard.org/discuss >--- >You received this message because you are subscribed to the Google Groups >"BeagleBoard" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
