I am in the same situation. Was trying out new images. Did an forced SD change to a non-bootable bbb. Now it won't boot. Just a pwr blink then dead.
Are there any other ways to recover other than RMA? PMIC replacement or reflashing of bootloader? Sam On Wednesday, June 18, 2014 9:53:25 PM UTC+8, Gerald wrote: > > Request an RMA. > > http://beagleboard.org/Support/RMA > > And read this. http://www.elinux.org/Beagleboard:BeagleBoneBlack#Hardware > > Gerald > > > On Mon, Jun 9, 2014 at 5:54 PM, <[email protected] <javascript:>> wrote: > >> My BBB (A5A) was working fine with ARM Arch (installed on the eMMC), but >> since yesterday it won't turn on. I don't know what changed. >> >> When I plug the power source or the USB cable the PWR Led quickly blinks, >> but the board doesn't turn on. >> If I press the POWER button, the PWR led does a single blink too, but it >> doesn't proceed to boot. >> >> I also tried to boot from the SD card, but It didn't work. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
