RMA is the only way.

I suggest you request an RMA.

Gerald


On Mon, Oct 27, 2014 at 10:56 PM, <[email protected]> wrote:

> I am in the same situation.  Was trying out new images.  Did an forced SD
> change to a non-bootable bbb. Now it won't boot.  Just a pwr blink then
> dead.
>
> Are there any other ways to recover other than RMA?  PMIC replacement or
> reflashing of bootloader?
>
> Sam
>
> On Wednesday, June 18, 2014 9:53:25 PM UTC+8, Gerald wrote:
>>
>> Request an RMA.
>>
>> http://beagleboard.org/Support/RMA
>>
>> And read this. http://www.elinux.org/Beagleboard:BeagleBoneBlack#Hardware
>>
>> Gerald
>>
>>
>> On Mon, Jun 9, 2014 at 5:54 PM, <[email protected]> wrote:
>>
>>> My BBB (A5A) was working fine with ARM Arch (installed on the eMMC), but
>>> since yesterday it won't turn on. I don't know what changed.
>>>
>>> When I plug the power source or the USB cable the PWR Led quickly
>>> blinks, but the board doesn't turn on.
>>> If I press the POWER button, the PWR led does a single blink too, but it
>>> doesn't proceed to boot.
>>>
>>> I also tried to boot from the SD card, but It didn't work.
>>>
>>> --
>>> For more options, visit http://beagleboard.org/discuss
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>  --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to