Hi Andrew,
Now we are using one customized board based on Beaglebone Black Design. In
case of BBB TI is writing some board type configuration in the EEPROM, so
during the Initial booting process it reads those information and
configures the board accordingly.
As we are using one fresh board we don't have anything written into the
EEPROM, because of which it is failing at the U-boot every time with some
errors like:
U-Boot SPL 2013.01.01-00129-g6d40c2a-dirty (Oct 30 2014 - 09:58:22)
Incorrect magic number (0xffffffff) in EEPROM
I have tried to skip the read_eeprom () in the u-boot which reads the
EEPROM header for board type, also done the Pin muxing in
board/ti/am335x/mux.c
but didn't get any better result out of this.
As per my knowledge if we will write the same Configuration into the EEPROM
as BBB then the board will boot properly. but we want to avoid that
procedure. so could you please tell me is there any other method to solve
this issue.
Looking for a quick response from your end ..
On Sunday, September 28, 2014 8:44:24 PM UTC+5:30, Andrew Henderson wrote:
>
> Hello all. I have released a new port of Android for the BBB. This
> version uses AOSP 4.4.4 (KitKat) and the 3.8 Linux kernel. I have made
> build instructions and a pre-made image available at
> http://www.bbbandroid.org. I use a combination of AOSP repos and Rowboat
> build scripts, and I have a few custom repos for the kernel, bootloader,
> and additional "external" tools (such as i2c-tools). You can view the repo
> manifest XML file for the project here:
>
>
> https://github.com/hendersa/bbbandroid-manifest/blob/master/bbbandroid-aosp-4.4.4_r1-3.8.xml
>
> Because this Android image uses the 3.8 kernel, you should be able to just
> plug in your capes and go without any hassle:
>
> Built-in HDMI cape:
> http://i.imgur.com/q4AZQ95.jpg
>
> 4D Systems LCD capes:
> 4DCAPE-43T: http://i.imgur.com/6qHmgqX.jpg
> 4DCAPE-70T: http://i.imgur.com/UZLG7Or.jpg
>
> CircuitCo LCD capes:
> LCD3: http://i.imgur.com/LC7SrBB.jpg
> LCD4: http://i.imgur.com/1xBQ8R6.jpg
> LCD7: http://i.imgur.com/vxoqROE.jpg
>
> Andrew
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
