Hi andrew! i tried you images (old and new) for beagle bone black. But i am not getting booted into it.
Is it required to connect Display, LAN, and USB mouse. If I use HDMI CABLE (sony erricsion) to connect my PC monitor, will it drive. the FTDI output: [ 6.038794] g_ffs: read descriptors [ 6.042738] g_ffs: read strings [ 6.060551] gadget: g_ffs ready [ 6.064563] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 6.072874] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 [ 6.081893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.089055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.096608] usb usb2: Product: MUSB HDRC host driver [ 6.101795] usb usb2: Manufacturer: Linux 3.8.13+ musb-hcd [ 6.107524] usb usb2: SerialNumber: musb-hdrc.0.auto [ 6.114174] hub 2-0:1.0: USB hub found [ 6.118361] hub 2-0:1.0: 1 port detected shell@beagleboneblack:/ $ [ 6.293332] CAUTION: musb: Babble Interrupt Occurred [ 6.391168] CAUTION: musb: Babble Interrupt Occurred [ 27.787048] warning: `zygote' uses 32-bit capabilities (legacy support in use) [ 43.804027] healthd: battery l=0 v=0 t=0.0 h=1 st=1 chg= [ 46.763599] net eth0: initializing cpsw version 1.12 (0) [ 46.772805] net eth0: phy found : id is : 0x7c0f1 [ 46.789857] libphy: PHY 4a101000.mdio:01 not found [ 46.794916] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 46.817629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 68.388050] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
