I just had another reboot on 3.18-rc2-bone1 On Friday, October 31, 2014 9:06:33 AM UTC+1, Ives van der Flaas wrote: > > I'm currently trying the 3.18-rc2-bone1, no issues so far. I won't be able > to check on them during the weekend so I'll know by monday. > > Op donderdag 30 oktober 2014 17:36:34 UTC+1 schreef RobertCNelson: >> >> On Thu, Oct 30, 2014 at 11:34 AM, david turvene <[email protected]> >> wrote: >> > On Thursday, October 30, 2014 5:50:43 AM UTC-4, Ives van der Flaas >> wrote: >> >> >> >> I'm running Robert C Nelson's latest 3.17 kernel (3.17.1-bone4) >> because I >> >> need the new TI musb babble recovery code. It seems however that I'm >> having >> >> some strange instability on my BBB. After somewhere between 10 and 24 >> hours, >> >> the device seems to reset suddenly and without warning. There's no >> kernel >> >> panic as far as I can see (no kernel.panic time-out in my sysctl >> either) and >> >> nothing in the dmesg or kern log files. It suddenly resets. >> >> >> > >> > FWIW, I'm seeing similar behavior on Debian 7.7 on 3.17-0.rc7-bone4; >> it'll >> > reboot somewhere between 2 and 48 hours for no apparent reason. It >> doesn't >> > seem to do it when I'm working on BBB so was suspecting something >> related to >> > the watchdog and/or the PRCM module putting the processor in low-power >> > suspend state. I was thinking of going back to 3.8 in a little bit. >> > >> > /proc/version: >> > >> > Linux version 3.17.0-rc7-bone4 (dturvene@growler) (gcc version 4.9.2 >> > 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro >> GCC >> > 4.9-2014.09) ) #1 Wed Oct 8 10:48:15 EDT 2014 >> > >> > Nothing on uart console but ALWAYS the last syslog statement before >> reboot >> > is the hourly cron job - but there is nothing in it. >> >> Are you guys still seeing this with 3.18-rc2? >> >> if you have my repo in /etc/apt/sources.list >> >> sudo apt-get update >> sudo apt-get install linux-image-3.18.0-rc2-bone1 >> sudo reboot >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
