On Friday, October 31, 2014 2:20:29 PM UTC-4, Ives van der Flaas wrote: > > I can confirm that the problem still exists on the 3.18-rc2-bone1. > >
Running the RCN 3.18-rc2-bone1 my system has rebooted several times over the weekend (EST). This is not good for me - and I've been trying to figure out the root. I am porting a wifi sniffing app (802.11 monitor mode) that worked fine on a Ubuntu 12.04 LTS laptop using one USB plug (two interfaces, second one is type monitor) and two USB plugs (second plug configured as monitor otherbss). I have a collection of wifi USB plugs on a 4-port USB hub; I control via wicd-cli or the dbus interface to wicd. My target plug (Edimax) that worked on 12.04 do not have drivers on Wheezy 7.7. I was planning on manually porting it's driver as the next step. * The system runs fine when I'm not messing around with the plugs, changing the wifi properties, or sniffing. When I do any of these the system occasionally silently reboots - I've been able to test up to 20 sniffing sessions before it reboots, sometimes it will reboot immediately when I start an monitor session. * I run the BBB headless, generally using SSH xterm. * The silent reboot happens with NO indication. NOTHING. The uart console just shows a system restart. * I triggered a watchdog NMI (it takes 22 seconds) and it showed a lot of diagnostic info - so that's not it. Dave -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
