@David, did you try it on 3.17 or 3.18? Jens did his patch on 3.17 so there could potentially be a difference there (unlikely that it is).
Op donderdag 6 november 2014 23:31:43 UTC+1 schreef david turvene: > > On Thursday, November 6, 2014 11:10:37 AM UTC-5, Jens Peter Schroer wrote: >> >> I have followed the USB OTG hint as mentioned in my previous post. I >> patched the dtb for the bbb so that the mini usb port runs as peripheral >> and not as OTG. The patch was deployed to 7 systems so far and they all are >> stable (no reboot) since then on any of the systems. The uptime is more >> than 3 days now. >> > @Jens - thanks for the tip. > > I tried it: setting usb0 dr_mode = peripheral and usb1 dr_mode = host. I > don't use usb0 at all; usb1 has a usb hub with wifi plugs. The BBB ran for > about a three hours under heavy load (125K packet captures w/ about 10K > dropped) and then silently reset. I'm going to try (1) soaking the BBB > with a light load overnight, 2) run power over usb0. > > Dave > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
