There is eSATA on the board. I do not know if it supports port multipliers. That would be a TI question.
Gerald On Sat, Nov 8, 2014 at 4:46 PM, William Hermans <[email protected]> wrote: > I did not notice the eSATA on the specs that I've read so far. However > assuming this board does have an eSATA port on it, does this port also > support hardware, or software port multipliers ? > > On Sat, Nov 8, 2014 at 3:21 PM, John Syn <[email protected]> wrote: > >> >> From: sixvolts <[email protected]> >> Reply-To: "[email protected]" <[email protected]> >> Date: Saturday, November 8, 2014 at 8:31 AM >> To: "[email protected]" <[email protected]> >> Subject: [beagleboard] Re: BeagleBoard-X15 - seriously? :) >> >> Any ideas how this compares to the wandboard quad? 4x Cortex-A9 vs 2x >> Cortex-A15? >> >> According to this article: >> >> http://www.arm.com/products/processors/cortex-a/cortex-a15.php >> >> Cortex-A15 performance is double that of Cortex-A9. Given that Wandboard >> runs at just at 1GHz and the X15 runs at 1.5GHz, I would guess that the X15 >> runs about 30% faster; however, the X15 has a dual 32bit bus, so the memory >> bandwidth is way higher. Also, the X15 also has dual C66x DSP processors, >> dual Cortex M4s and dual PRUs, so this board will be a screamer compared to >> the wandboard. >> >> Regards, >> John >> >> >> Also, this would be awesome to setup a small Arm cluster with since it >> has a decent RAM/core count ratio, gig/e and sata. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
