On Tuesday, 11 November 2014 07:00:38 UTC-6, DeKay wrote:
>
>
> What I do know is that my eth0 was completed commented out after I flashed
> my Bone with 3.14, yet the wired network interface came up without issue in
> /etc/network/interfaces. Now that I think about it, the image I flashed
> for Jessie contains lxqt, so maybe there is kind of tool working behind the
> scenes. I'm doing everything from a serial console and might not have
> noticed this.
>
> <boots his Bone>... Ah, I see that connman is working behind the scenes.
> Hmmmm....
>
Well, so much for that. With my ZD1211 stick connected via a USB extension
cable...
root@beaglebone:~# ifconfig
wlan0 Link encap:Ethernet HWaddr 00:11:e2:01:85:9d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@beaglebone:~# connmanctl scan wifi
Error /net/connman/technology/wifi: Not supported
root@beaglebone:~# iw wlan0 connect Wlan1-97AA60
root@beaglebone:~# connmanctl scan wifi
Error /net/connman/technology/wifi: Not supported
root@beaglebone:~# dhclient wlan0
root@beaglebone:~# ifconfig
wlan0 Link encap:Ethernet HWaddr 00:11:e2:01:85:9d
inet addr:176.16.1.62 Bcast:176.16.1.255 Mask:255.255.255.0
inet6 addr: fe80::211:e2ff:fe01:859d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8261 (8.0 KiB) TX bytes:10616 (10.3 KiB)
root@beaglebone:~# ping www.google.com
<no response this morning, gave me DUPs yesterday>
Sigh...
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
