> > *But there is no /sys/devices/bone_capemgr.*/slots because there's no > capemanager.* >
Ok, I can not give you exact steps, because I have not done this myself ( I still use 3.8.x too ) but you would load the device tree file from uEnv.txt. Something like *dtb=somedtbfilename.extension* and in this case you would probably use Charles' universal IO https://github.com/cdsteinkuehler/beaglebone-universal-io and once loaded you configure the pins ( on the fly ) from the command line. On Wed, Dec 10, 2014 at 1:28 PM, TJF <[email protected]> wrote: > > > Am Mittwoch, 10. Dezember 2014 21:21:18 UTC+1 schrieb Tux Leonard: >> >> But there is no /sys/devices/bone_capemgr.*/slots because there's no >> capemanager. >> > I didn't know that. What does the manual say? How to load any device tree > overlay in that case? (uEnv.txt command?) The same way should work for > libpruio-00A0.dtbo as well. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
