On Mon, Dec 15, 2014 at 9:06 PM, William Welch <[email protected]> wrote: > My mistake, I am very sorry. The ftdi driver is there on this console > flasher image. What is missing on the flasher, is the firmware for my wifi > -- htc_9271.fw
So the firmware should be in the lxde image. However, for the console image, the goal was to be as minimal as possible and still be able to flash the eMMC... So while yes, this means it'll be missing firmware/etc, it should be a nice simple base for everyone to work off of. > However, on the uSD card image, after switching to the TI kernel, via > update_kernel.sh there seem to be no ftdi_sio module. This may not matter > -- I am not sure that I would use the TI kernel, except that if I understand > correctly, it is considered a 'long term' version. Ah! My mind wasn't clear on what you meant on ftdi_sio. So yes i'll add the configs to the default v3.14.x branch. ;) I just re-fixed the lcd's with r41 today but i'll start adding more configs by default. > by the way, for my use case, eMMC reliability and USB host support are the > key factors. So I am attempting to evaluate each of your offerings. For that, v3.14.x is your best choice, btw, you should also make sure you've upraded to r41: sudo apt-get update sudo apt-get install linux-image-3.14.26-ti-r41 sudo reboot As there was an ethernet & usb fix in the ti merge from today included: https://github.com/RobertCNelson/ti-linux-kernel/compare/c5591108a697733b6370ef8682802e0112a6c4e7...f733aa036398f9e8578f90406a90a709e00cf60f Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
